Orderer: PGE Górnictwo i Energetyka Konwencjonalna S. A.
Storage tank, vertical type ZV-52.7/30 upper bottom ellipsoidal, lower bottom flat.
Type ZC – Rectangular tanks
The type ZC rectangular tanks we offer are suitable for both outdoor and indoor use. They perform well mainly in areas where space is limited. The structure of the tank and its equipment are designed to take into account the individual requirements of the customer and meet specific technical requirements.
Rectangular tanks in the WATER series are designed for water storage:
* fire prevention
* rainy
* drinking
* industrial
Advantages and benefits
The production range of TROKOTEX includes rectangular tanks of any capacity. The overall dimensions of tanks of this type (length, width and height) as well as the number and positioning of manholes and stub pipes are determined individually for each customer depending on the purpose of the tank and the conditions of its operation.
Since the optimal rigidity is possessed by tanks with low height, it is recommended to design tanks with a height not exceeding 2200 mm. If a large capacity tank is required then it is recommended to design them wider and/or longer rather than taller.
Large-size products
Unusual shapes
Minimum operating cost
Excellent corrosion resistance
Specification
All Trokotex Polymer Group Sp. z o.o.’s glass-reinforced plastic rectangular tanks are subjected to detailed tests at the Testing Laboratory, which is recognized by the Office of Technical Inspection.
* there is a possibility to make large-size products with unusual shapes,
The water tanks are hygienically approved by the PZH for contact with drinking water. The highest quality resins and fiberglass are used in production, which brings many advantages:
* The tanks are characterized by low weight, high mechanical strength and UV resistance,
* The resin does not come into contact with a medium such as water (the water is not contaminated),
* operating cost is minimal
* The tanks have excellent corrosion resistance,
At special request we make tanks with a height greater than 2200 mm. Such tanks have additional reinforcements of vertical walls in the form of stiffening ribs (internal and/or external) or internal bulkheads.
Realizations
Orderer: Energoinstal S.A., KGHM Polkowice
Vertical bunded tanks for ammonia water type ZVd-35.0/24
Orderer: Kaja S. J., Zakład produkcyjny ETOS Czesław Szymendera
Single-walled vertical tanks with connecting platform type ZVp-36.0/28
Orderer: UNIBEP S.A. with registered office in Bielsko Podlaskie
Storage tanks, double-walled with equipment for ammonia water.
Dimensional tables
Similar products
Galvanic bath
Tank bath
Mixer
Mixer
Silos
Vertical tanks on saucer and steel structure
Type ZVł legs
Vertical foot tanks
Type ZH with a bath
Horizontal tanks with two supports
Type ZP
Underground tanks
Type ST
Underground tanks well
Type ZC
Rectangular tanks grp
Type ZHc
Horizontal tanks on continuous support
Configurator
We present to you a dedicated Tank Configurator that will make the process of selecting the storage tanks you are interested in easier and more attractive.
The configurator allows you to select the appropriate type of tank along with specifying its capacity [m3] and diameter [mm]. Based on this, a technical drawing is presented along with detailed technical specifications.
Configure your tank
Product Catalogue
